Ipv6 Mce Configuration Commands; Display Bgp Group Ipv6 Vpn-Instance - HP 6125XLG Command Reference Manual

IPv6 MCE configuration commands

This chapter describes only IPv6 MCE specific commands. To configure IPv6 MCE, you must use some
MCE commands in VPN instance view or IPv6 VPN view. For more information, see
commands."

display bgp group ipv6 vpn-instance

Use display bgp group ipv6 vpn-instance to display information about the BGP IPv6 peers in the
specified VPN instance.
Syntax
display bgp group ipv6 vpn-instance vpn-instance-name [ group-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-name: Specifies a BGP IPv6 peer group by its name, a case-sensitive string of 1 to 47 characters.
If no group is specified, this command displays brief information about all BGP IPv6 peer groups.
vpn-instance vpn-instance-name: Specifies the name of a VPN instance, a case-sensitive string of 1 to 31
characters.
Examples
# Display brief information about all BGP IPv6 peer groups in the VPN instance vpn1.
<Sysname> display bgp group ipv6 vpn-instance vpn1
BGP peer group: grp1
Remote AS number: Not specified
Type: external
Members:
3::3
BGP peer group: grp2
Remote AS: 100
Type: internal
Members:
4::4
# Display detailed information about BGP IPv6 peer group grp1 in the VPN instance vpn1.
<Sysname> display bgp group ipv6 vpn-instance vpn1 grp1
BGP peer group: grp1
Remote AS number: Not specified
Type: external
17
"MCE configuration