Ipv6 Vrrp Commands; Display Vrrp Ipv6 - HP 6125XLG Command Reference Manual

Blade switch high availability command reference
Table of Contents

Advertisement

track-entry-number: Specifies a track entry by its number in the range of 1 to 1024.
reduced weight-reduced: Reduces the weights of the VFs in the IPv4 VRRP group by a specific value when
the state of the specified track entry changes to negative. The weight-reduced argument is in the range
of 1 to 255.
Usage guidelines
This command is effective only when IPv4 VRRP operates in load balancing mode.
When the state of the track entry transits to Positive or NotReady, the original weight values of the VFs
restore.
By default, the weight of a VF is 255, and its lower limit of failure is 10.
When the weight of a VF owner is higher than or equal to the lower limit of failure, its priority is always
255 and does not change with the weight. To guarantee that an LVF can take over the VF owner as the
AVF when the link of the VF owner fails, the reduced weight for the VF owner must be higher than 245
so the weight of the VF owner can drop below the lower limit of failure.
If the reduced weight-reduced option is not specified, the weights of the VFs in the VRRP group decrease
by 30 when the state of the track entry changes to negative.
You can create a track entry with the track command before or after you associate it with the VFs of an
IPv4 VRRP group.
For more information about configuring track entries, see High Availability Configuration Guide.
Examples
# Associate the VFs of IPv4 VRRP group 1 on VLAN-interface 2 with track entry 1 and decrease the
weights of the VFs in the VRRP group by 50 when the state of track entry 1 changes to negative.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] vrrp vrid 1 weight track 1 reduced 50
Related commands
display vrrp

IPv6 VRRP commands

display vrrp ipv6

Use display vrrp ipv6 to display the states of IPv6 VRRP groups.
Syntax
display vrrp ipv6 [ interface interface-type interface-number [ vrid virtual-router-id ] ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
81

Advertisement

Table of Contents
loading

Table of Contents