Display Power; Display Schedule Reboot - H3C s3600 series Command Manual

Table 3-6 Description on the fields of the display patch-information command
patch version
program version
patch status

display power

Syntax
display power [ unit unit-id [ power-id ] ]
View
Any view
Parameters
unit-id: Unit ID of a switch.
power-id: Power ID.
Description
Use the display power command to display the working state of the power supply of the switch.
Examples
# Display the working state of the power supply.
<Sysname> display power
Unit 1
power 1
State : Normal
Type : AC
The above information indicates that the power supply type is AC, and works normally.

display schedule reboot

Syntax
display schedule reboot
View
Any view
Parameters
None
Description
Use the display schedule reboot command to display information about scheduled reboot.
Field
3-7
Description
Patch version number
Patch baseline version number
Patch state: IDLE, DEACTIVE, ACTIVE,
RUNNING