Mac-Learning - Allied Telesis AR2050V Command Reference Manual

B C
RIDGING OMMANDS
-
MAC LEARNING

mac-learning

Overview Use this command to enable FDB MAC address learning on a bridge interface. In
some circumstances, FDB MAC address learning on a software-based router bridge
is not useful, and it is better to flood the traffic within interfaces associated with the
bridge instance, to ensure the traffic reaches its destination.
Use the no variant of this command to disable or enable FDB MAC address learning
on a bridge.
mac-learning
Syntax
no mac-learning
Default Learning is enabled by default.
Mode Interface mode for a bridge interface
Example To turn off learning on bridge 2, use the following commands:
awplus#
awplus(config)#
awplus(config-if)#
To turn learning on bridge 2 back on, use the following commands:
awplus#
awplus(config)#
awplus(config-if)#
Command Version 5.4.7-0.1: command added
changes
C613-50186-01 Rev B
configure terminal
interface br2
no mac-learning
configure terminal
interface br2
mac-learning
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
457