Show Bridge - Allied Telesis AR2050V Command Reference Manual

B C
RIDGING OMMANDS

SHOW BRIDGE

show bridge
Syntax Use this command to display detailed information about your bridge(s).
show bridge [<bridge-list>]
Syntax
Default Displays detailed information about all bridges, if no <bridge-list> is specified.
Mode Privileged Exec
Examples To display information about all bridges, use the following command:
awplus#show bridge
To display information about bridge 2, use the following command:
awplus#show bridge br2
To display information about bridge in the range 1 to 3, use the following
command:
awplus#show bridge br1-3
To display information about bridges 1, and from 3 to 5, use the following
command:
awplus#show bridge br1,br3-5
Output Figure 14-4: Example output from the show bridge command displaying
C613-50186-01 Rev B
Parameter Description
<bridge-list>
The bridge/s to display the information about.
The <bridge-list> can be:
• a single bridge(e.g. br2)
• a continuous range of bridges (e.g. br1-3)
• a comma separated list of bridges and/or ranges (e.g.
information about all bridges:
awplus#show bridge 
Bridge Name Aging Timer
------------------------------------------ 
br1
br2
br3
br4
br5
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
br1,br2,br3-br5)
Interfaces 
eth1 
300
vlan1 
300
eth2 
300 
300 
300
460