Show Mac-Filter - Allied Telesis AR2050V Command Reference Manual

B C
RIDGING OMMANDS
-
SHOW MAC FILTER

show mac-filter

Overview This command displays all hit counters for all MAC filter rules applied to a bridge.
show mac-filter [bridge <bridge-id>]
Syntax
Default Displays all counters for all mac-filters on a bridge
Mode Privileged Exec Mode
Examples To display all mac-filter bridge counters, use the following commands:
awplus#show mac-filter
To display mac-filter bridge counters for bridge 2, use the following commands:
awplus#show mac-filter bridge 2
Output Figure 14-7: Example output from the show mac-filter bridge command
awplus#show mac-filter 
Bridge Rule
---------------------------------------------------------------------------- 
br1 DENY_1
br1 DENY_2
br1 PERMIT
br2 BROADCAST
br2 DENY_IPv6
br2 DENY_USER
br2 PERMIT
Related mac-filter
Commands
mac-filter-group
C613-50186-01 Rev B
Parameter
<bridge-id>
displaying information about all rules:
DMAC SMAC
any 0000.1111.2222
aabb.ccdd.eeff 1234.5678.9123
any any
ffff.ffff.ffff any
any any
any aabb.ccdd.eeff
any any
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
The bridge ID (from 1 to 16).
Pkt Count
112
30
2261
54
1057
365
32581
Byte Count 
148312 
40462 
3364302 
6653 
972605 
447433 
36648579
463