Show Bridge Macaddr - Allied Telesis AR2050V Command Reference Manual

B C
RIDGING OMMANDS

SHOW BRIDGE MACADDR

show bridge macaddr
Overview Use this command to display the MAC entries learned in the MAC table for your
bridge.
show bridge macaddr <bridge-list>
Syntax
Mode Global Configuration
Example To display the learned MAC entries for bridge 2, use the following commands:
awplus#configure terminal
awplus(config)#show bridge macaddr br2
Output Figure 14-6: Example output from the show bridge macaddr command
awplus#show bridge macaddr br2 
Bridge Name Interface
------------------------------------------------------------------------- 
br2 vlan10
br2 vlan50
br2 vlan50
br2 vlan50
br2 vlan50
br2 vlan50
br2 vlan50
br2 vlan50
br2 vlan50
Related ageing-time
Commands
bridge
bridge-group
show bridge
C613-50186-01 Rev B
Parameter
<bridge-list>
displaying information about bridge 2:
mac addr
ec:cd:6d:20:c0:fb
00:c4:6d:20:c0:e6
00:c4:6d:20:c0:e7
00:c4:6d:20:c0:e8
00:c4:6d:20:c0:f2
00:c4:6d:20:c0:f3
00:c4:6d:20:c0:f4
ec:cd:6d:20:c0:bd
ec:cd:6d:48:e4:72
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
The bridge interfaces to display the information about.
The <bridge-list> can be:
• a single bridge(e.g. br2)
• a continuous range of bridges (e.g. br1-3)
• a comma separated list of bridges and/or ranges (e.g.
br1,br2,br3-br5)
is local?
no
no
no
no
no
no
no
yes
no
ageing 
41 
0 
1 
2 
12 
13 
14 
0 
41
462