Ip Igmp Ssm-Map Enable - Allied Telesis x510-28GTX Command Reference Manual

IGMP IGMP S C
AND NOOPING OMMANDS
-
IP IGMP SSM MAP ENABLE

ip igmp ssm-map enable

Overview Use this command to enable Source Specific Multicast (SSM) mapping on the
device.
Use the no variant of this command to disable SSM mapping.
Syntax ip igmp ssm-map enable
no ip igmp ssm-map enable
Mode Global Configuration
Usage This command applies to VLAN interfaces configured for IGMP.
Example To enable SSM on the device enter the commands:
awplus#
awplus(config)#
Related ip igmp ssm-map static
Commands
C613-50170-01 Rev B
configure terminal
ip igmp ssm-map enable
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1228