Show Ip Igmp Snooping Mrouter - Allied Telesis x510-28GTX Command Reference Manual

IGMP IGMP S C
AND NOOPING OMMANDS

SHOW IP IGMP SNOOPING MROUTER

show ip igmp snooping mrouter
Overview Use this command to display the multicast router ports, both static and dynamic,
in a VLAN.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show ip igmp snooping mrouter [interface <interface>]
Mode User Exec and Privileged Exec
Example To show all multicast router interfaces, use the command:
awplus#
To show the multicast router interfaces in vlan1, use the command:
awplus#
Output Figure 30-3: Example output from show ip igmp snooping mrouter
Figure 30-4: Example output from show ip igmp snooping mrouter interface
Related ip igmp snooping mrouter
Commands
C613-50170-01 Rev B
Parameter Description
interface
A specific interface.
<interface>
The name of the VLAN interface.
show ip igmp snooping mrouter
show ip igmp snooping mrouter interface vlan1
VLAN Interface
1 port1.0.5
200 port1.0.2
vlan1
VLAN Interface
1 port1.0.5
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Static/Dynamic
Statically configured
Statically configured
Static/Dynamic
Statically configured
"Getting Started
Guide.
1243