Show Ip Igmp Snooping Statistics - Allied Telesis x510-28GTX Command Reference Manual

IGMP IGMP S C
AND NOOPING OMMANDS

SHOW IP IGMP SNOOPING STATISTICS

show ip igmp snooping statistics
Overview Use this command to display IGMP Snooping statistics data.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show ip igmp snooping statistics interface <interface-range>
[group [<ip-address>]]
Mode Privileged Exec
Example To display IGMP statistical information for vlan1 and vlan2, use the command:
awplus#
Output Figure 30-7: Example output from the show ip igmp snooping statistics
C613-50170-01 Rev B
Parameter Description
<ip-address>
Optionally specify the address of the multicast group, entered in
the form A.B.C.D.
<interface>
Specify the name of the interface or interface range. If you
specify a port number, the output displays the number of
groups the port belongs to, and the port's group membership
limit, if a limit has been set (with the command
maximum-groups)
show ip igmp snooping statistics interface vlan1-vlan2
command for VLANs
awplus#show ip igmp interface vlan1-vlan2
IGMP Snooping statistics for vlan1
Interface: port1.0.3
Group: 224.1.1.1
Uptime: 00:00:09
Group mode: Exclude (Expires: 00:04:10)
Last reporter: 10.4.4.5
Source list is empty
IGMP Snooping statistics for vlan2
Interface: port1.0.4
Group: 224.1.1.2
Uptime: 00:00:19
Group mode: Exclude (Expires: 00:05:10)
Last reporter: 10.4.4.6
Source list is empty
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
"Getting Started
Guide.
ip igmp
1246