Ip Igmp Ssm - Allied Telesis x510-28GTX Command Reference Manual

IGMP IGMP S C
AND NOOPING OMMANDS

IP IGMP SSM

ip igmp ssm
Overview Use this command to define a non-default Source Specific Multicast (SSM) range of
IP multicast addresses in IGMP. Incoming IGMPv1 and IGMPv2 join requests are
ignored if the multicast IP address is in the SSM range and no SSM mapping is
configured for these addresses. By default, the SSM range is 232/8. To define the
SSM range to be other than the default, use one of the access-list parameter
options.
Use the no variant of this command to change the SSM range in IGMP back to the
default.
ip igmp ssm range {<access-list-number>|<access-list-name>}
Syntax
no ip igmp ssm
Default By default the SSM range is 232/8.
Mode Global Configuration
Examples To configure a non-default SSM range to be used in IGMP enter the commands:
awplus#
awplus(config)#
awplus(config)#
To return to the default configuration enter the commands:
awplus#
awplus(config)#
Related access-list (standard numbered)
Commands
ip pim ssm
C613-50170-01 Rev B
Parameter
<access-list-number>
<access-list-name>
configure terminal
access-list 10 permit 224.1.1.0 0.0.0.255
ip igmp ssm range 10
configure terminal
no ip igmp ssm
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Access-list number, in the range 1 to 99.
Standard IP access-list name.
1227