Show Ip Igmp Proxy - Allied Telesis x510-28GTX Command Reference Manual

IGMP IGMP S C
AND NOOPING OMMANDS

SHOW IP IGMP PROXY

show ip igmp proxy
Overview Use this command to display the state of IGMP Proxy services for a specified
interface or for all interfaces.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show ip igmp proxy
show ip igmp proxy groups [detail]
show ip igmp proxy groups <multicast-group> [detail]
show ip igmp proxy groups <vlan> [detail]
show ip igmp proxy groups <vlan> <multicast-group> [detail]
Mode User Exec and Privileged Exec
Example To display the state of IGMP Proxy services for all interfaces, enter the command:
awplus#
To display the state of IGMP Proxy services for VLAN interface vlan1, enter the
command:
awplus#
To display the detailed state of IGMP Proxy services for VLAN interface vlan1, enter
the command:
awplus#
Related ip igmp proxy-service
Commands
C613-50170-01 Rev B
Parameter Description
groups
Specify IGMP proxy group membership information.
detail
Specify detailed IGMPv3 source information.
<vlan>
Specify the name of a single VLAN interface, for example vlan1.
<multicast-
Specify the IPv4 address in of the multicast group, in the format
group>
A.B.C.D.
show ip igmp proxy
show ip igmp proxy groups vlan1
show ip igmp proxy groups vlan1 detail
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
"Getting Started
Guide.
1242