Agilent Technologies E5071C Manual page 1368

SCPI.CALCulate(Ch).FSIMulator.BALun.PARameter.TNAMe.SBALanced.DEFi
ne(Name)
Object type
Property (Read-Write)
Syntax
SCPI.CALCulate(Ch).FSIMulator.BALun.PARameter.TNAMe.SBALanced.DEFi
ne(Name) = Param
Param =
SCPI.CALCulate(Ch).FSIMulator.BALun.PARameter.TNAMe.SBALanced.DEFi
ne(Name)
Description
This command sets/gets the measurement parameter when the balance
device type is "unbalance-balance", for the selected trace of the selected
channel (Ch). The trace can be selected by the trace name once its defined
earlier with SCPI.CALCulate(Ch).PARameter(Tr).TNAMe.DATA command.
This function is available in the revision A.9.60 and above.
Variable
Parameter
Description
Data type
Parameter
Description
Data type
Range
Name
Trace Name
Character string type (String)
Param
Measurement parameter
Character string type (String)
Select from the following.
"SSS11": Specifies Sss11.
•
"SDS21": Specifies Sds21.
•
"SSD12": Specifies Ssd12.
•
"SCS21": Specifies Scs21.
•
"SSC12": Specifies Ssc12.
•
Programming
1595