Agilent Technologies E5071C Manual page 1363

E5071C
SCPI.CALCulate(Ch).FSIMulator.BALun.PARameter.TNAMe.BALanced.DEFin
e(Name)
Object type
Property (Read-Write)
Syntax
SCPI.CALCulate(Ch).FSIMulator.BALun.PARameter.TNAMe.BALanced.DEFin
e(Name) = Param
Param =
SCPI.CALCulate(Ch).FSIMulator.BALun.PARameter.TNAMe.BALanced.DEFin
e(Name)
Description
This command sets/gets the measurement parameter when the balance
device type is "balance", for the selected trace of the selected channel
(Ch). The trace can be selected by the trace name once its defined earlier
with SCPI.CALCulate(Ch).PARameter(Tr).TNAMe.DATA command. This
function is available in the revision A.9.60 and above.
Variable
Parameter
Description
Data type
Parameter
Description
Data type
Range
1590
Name
Trace Name
Character string type (String)
Param
Measurement parameter
Character string type (String)
Select from the following.
"SDD11": Specifies Sdd11.
•
"SCD11": Specifies Scd11.
•
"SDC11": Specifies Sdc11.
•
"SCC11": Specifies Scc11.
•