Agilent Technologies E5071C Manual page 1334

SCPI.CALCulate(Ch).FSIMulator.BALun.CZConversion.BPORt(Bpt).Z0.R
Object type
Property (Read-Write)
Syntax
SCPI.CALCulate(Ch).FSIMulator.BALun.CZConversion.BPORt(Bpt).Z0.R =
Value
Value =
SCPI.CALCulate(Ch).FSIMulator.BALun.CZConversion.BPORt(Bpt).Z0.R
Description
This command sets/gets the impedance value for the common port
impedance conversion function, for balance ports 1 and 2 (Bpt) of the
selected channel (Ch).
This command clears setting value of
•
SCPI.CALCulate(Ch).FSIMulator.BALun.CZConversion.
BPORt(Bpt).IMAGinary
Variable
Parameter
Description
Data type
Range
Preset
value
Unit
Resolution
Note
Examples
Value
Impedance value for the common port impedance
conversion function
Double precision floating point type (Double)
1E-3 to 1E7
25
ohm
0.001
If the specified variable is out of the allowable setup
range, the minimum value (if the lower limit of the range
is not reached) or the maximum value (if the upper limit
of the range is exceeded) is set.
Programming
1561