Agilent Technologies E5071C Manual page 1383

E5071C
SCPI.CALCulate(Ch).FSIMulator.BALun.PARameter(Tr).SSBalanced.DEFine
Object type
Property (Read-Write)
Syntax
SCPI.CALCulate(Ch).FSIMulator.BALun.PARameter(Tr).SSBalanced.DEFine
= Param
Param =
SCPI.CALCulate(Ch).FSIMulator.BALun.PARameter(Tr).SSBalanced.DEFine
Description
This command sets/gets the measurement parameter when the balance
device type is "unbalance-unbalance-balance", for the selected trace (Tr)
of selected channel (Ch).
Variable
Parameter
Description
Data type
Range
1610
Param
Measurement parameter
Character string type (String)
Select from the following.
"SSS11": Specifies Sss11.
•
"SSS21": Specifies Sss21.
•
"SSS12": Specifies Sss12.
•
"SSS22": Specifies Sss22.
•
"SDS31": Specifies Sds31.
•
"SDS32": Specifies Sds32.
•
"SSD13": Specifies Ssd13.
•
"SSD23": Specifies Ssd23.
•
"SCS31": Specifies Scs31.
•
"SCS32": Specifies Scs32.
•
"SSC13": Specifies Ssc13.
•
"SSC23": Specifies Ssc23.
•
"SDD33": Specifies Sdd33.
•
"SCD33": Specifies Scd33.
•
"SDC33": Specifies Sdc33.
•