Agilent Technologies E5071C Manual page 1332

SCPI.CALCulate(Ch).FSIMulator.BALun.CZConversion.BPORt(Bpt).REAL
Object type
Property (Read-Write)
Syntax
SCPI.CALCulate(Ch).FSIMulator.BALun.CZConversion.BPORt(Bpt).REAL =
Value
Value =
SCPI.CALCulate(Ch).FSIMulator.BALun.CZConversion.BPORt(Bpt).REAL
Description
This command sets/gets the impedance value (real part) for the common
port impedance conversion function, for balance ports 1 and 2 (Bpt) of the
selected channel (Ch).
This command performs in the same way as
•
SCPI.CALCulate(Ch).FSIM-ulator.BALun.CZConversion.
BPORt(Bpt).Z0.R
Variable
Parameter
Description
Data type
Range
Preset
value
Unit
Resolution
Note
Examples
Value
Impedance value (real part) for the common port
impedance conversion function
Double precision floating point type (Double)
1E-3 to 1E7
25
ohm
0.001
If the specified variable is out of the allowable setup
range, the minimum value (if the lower limit of the range
is not reached) or the maximum value (if the upper limit
of the range is exceeded) is set.
Programming
1559