Agilent Technologies E5071C Manual page 1374

SCPI.CALCulate(Ch).FSIMulator.BALun.PARameter.TNAMe.STATe(Name)
Object type
Property (Read-Write)
Syntax
SCPI.CALCulate(Ch).FSIMulator.BALun.PARameter.TNAMe.STATe(Name) =
Status
Status =
SCPI.CALCulate(Ch).FSIMulator.BALun.PARameter.TNAMe.STATe(Name)
Description
This command turns ON/OFF the balance-unbalance conversion function
when the fixture simulator function is ON, for the selected trace of the
selected channel (Ch). The trace can be selected by the trace name once
its defined earlier with SCPI.CALCulate(Ch).PARameter(Tr).TNAMe.DATA
command. This function is available in the revision A.9.60 and above.
Variable
Parameter
Description
Data type
Parameter
Description
Data type
Range
Preset
value
Name
Trace Name
Character string type (String)
Status
ON/OFF of the balance-unbalance conversion function
Boolean type (Boolean)
Select from the following.
True or ON: Turns ON the balance-unbalance
•
conversion function.
False or OFF: Turns OFF the balance-
•
unbalance conversion function.
False or OFF
Programming
1601