Agilent Technologies E5071C Manual page 1350

SCPI.CALCulate(Ch).FSIMulator.BALun.DMCircuit.BPORt(Bpt).USER.FILena
me
Object type
Property (Read-Write)
Syntax
SCPI.CALCulate(Ch).FSIMulator.BALun.DMCircuit.BPORt(Bpt).USER.FILena
me = File
File =
SCPI.CALCulate(Ch).FSIMulator.BALun.DMCircuit.BPORt(Bpt).USER.FILena
me
Description
This command specifies the file in which the information on the user-
defined differential matching circuit is saved (2-port touchstone file with
the .s2p extension), for the balance ports 1 and 2 (Bpt) of the selected
channel (Ch).
Specify the file name with the extension. When you use directory names
(folder names) and file name, separate them with "\ " (back slash), or "/"
(slash).
Even if the specified file does not exist, no error occurs when you execute
this object. However, when you set the type of the differential matching
circuit to the user-defined circuit with the
SCPI.CALCulate(Ch).FSIMulator.BALun.DMCircuit. BPORt(Bpt).TYPE object,
an error occurs when executed.
Variable
Parameter
Description
Data type
Range
Preset
value
Examples
Dim DmcUser As String
SCPI.CALCulate(1).FSIMulator.BALun.DMCircuit.BPORt(1).USER.FILename = "dmc.s2p"
File
2-port touchstone file name (extension: .s2p) for the
differential matching circuit
Character string type (String)
254 characters or less
""
Programming
1577