Agilent Technologies E5071C Manual page 1344

SCPI.CALCulate(Ch).FSIMulator.BALun.DMCircuit.BPORt(Bpt).PARameters.L
Object type
Property (Read-Write)
Syntax
SCPI.CALCulate(Ch).FSIMulator.BALun.DMCircuit.BPORt(Bpt).PARameters.
L = Value
Value =
SCPI.CALCulate(Ch).FSIMulator.BALun.DMCircuit.BPORt(Bpt).PARameters.
L
Description
This command sets/gets the L value of the differential matching circuit
consisting of shunt L and shunt C (PLPC is specified with the
SCPI.CALCulate(Ch).FSIMulator.BALun.DMCircuit. BPORt(Bpt).TYPE
object), for the balance port 1 and balance port 2 (Bpt) of selected channel
(Ch).
Variable
Parameter
Description
Data type
Range
Preset
value
Unit
Resolution
Note
Value
L value of the differential matching
circuit
Double precision floating point type
(Double)
-1E18 to 1E18
0
H (henry)
1E-18
If the specified variable is out of the
allowable setup range, the minimum
value (if the lower limit of the range is
not reached) or the maximum value (if
the upper limit of the range is
exceeded) is set.
Programming
1571