Table of Contents
Advertisement
2
Flat-Panel Display
Connecting a Rack-Mounted Flat-Panel Display
If you're setting up racked system with a flat- panel display, installation
includes mounting the display and peripherals on a swing arm assembly.
Figure 3
for connecting the display, keyboard, and mouse.
Table 8
Description
Swing arm assembly
Bolt, locking lever, black
T-bolt
Cap
Monitor, LCD 15"
Bolts, M4 x 0.7, 14 mm
Keyboard, HP
Mouse
Bolt, star knob
To attach the swing arm, display, keyboard, and mouse
Step
1 Loosely attach the two locking-lever bolts and
2 Slide the swing arm assembly into the slide bar
3 Tighten the lever bolts to secure the swing arm
4 Install the star-knob safety stop at least 1 in
5 Install caps on the top and bottom of the slide
6 Use the four M4 x 0.7 bolts to attach the
7 Place the keyboard on the left side of the swing arm
20
on page 21 provides an overview.
Monitor, keyboard, and mouse parts listing
three t-bolts to the swing arm assembly.
(from either the top or bottom), making sure the
t-bolts are in the channel tracks.
to the slide bar at the desired height.
from the bottom of the slide bar. Tighten
securely.
bar.
monitor to the bracket on the swing arm.
tray. Press down on the back of the keyboard to
secure the keyboard to the tray.
Table 8
lists the parts needed
Part Number
0960-1104
85127-80238
85127-80232
85127-80236
2090-0804
0515-0685
C3757-60401
85121-80287
85127-80237
Notes
•
Refer to items 1, 2, and 3 in
page 21.
•
Refer to Note 1 in
Figure 3
•
The star knob prevents the swing arm from
falling from the slide bar should the
locking-levers fail.
•
Refer to Note 2 in
Figure
•
The keyboard fits snugly on the tray.
E5505A Installation Guide
Quantity
1
2
3
2
1
4
1
1
2
Figure 3
on
on page 21.
3.
Advertisement
Table of Contents
