Quidway S3700 Series Ethernet Switches
Configuration Guide - Multicast
No.
3
3.4.2 Creating a Multicast VLAN
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
A VLAN is created and the VLAN view is displayed.
Step 3 Run:
igmp-snooping enable
IGMP snooping is enabled in the VLAN.
----End
3.4.3 Binding User VLANs to a Multicast VLAN on an Interface
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
l2-multicast-bind vlan vlanid1 [ to vlanid2 ] mvlan mvlanid
User VLANs are bound to a multicast VLAN on the interface.
This command is used on user-side interfaces.
The user VLANs must exist, and cannot be multicast VLANs or user VLANs of another multicast
VLAN.
----End
3.4.4 Adding Interfaces to VLANs
Issue 01 (2011-10-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Multicast VLAN Replication Configuration
Data
Types and numbers of interfaces
43