Display Encrypt-Card Statistic - 3Com 3C13618 Command Reference Manual

3Com Command Reference Guide — V1.00
This command is applicable to crypto cards.
In case such SA does not exist or the input slot-id does not match the ID of the slot
where the crypto card is located, the system will prompt "no such a SA". If the input
slot-id is larger than the slot-number of the router, the system will prompt "Invalid
encrypt-card slot-id".
For related commands, see display encrypt-card ipsec sa all.
Example
# Display the specified SA information on the crypto card.
[3Com] display encrypt-card ipsec sa parameters 202.38.0.2 esp 54321
esp SAs
proposal: ESP-ENCRYPT-BLOWFISH
proposal: ESP-AUTH-MD5HMAC96
local address: 2.1.1.1
peer address: 2.2.2.2
sa timing: remaining key lifetime (bytes/sec): (1887436800/2611)
spi: 54321 (0xd431)

4.1.7 display encrypt-card statistic

Syntax
display encrypt-card statistic [ slot-id ]
View
All views
Parameter
slot-id: The ID of the slot where the crypto card is located. The value range is
determined by the number of the slots on the router. If no value is input, the operation
will be implemented on all the crypto cards.
Description
Using the display encrypt-card statistic command, you can view the statistical
information of crypto card handling.
This command is applicable to the crypto card.
48