Controller T1 - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
View
/PRI interface view
Parameter
ami: Adopt the line code format ami (Alternate Mark Inversion).
b8zs: Adopt the line code format b8zs (Bipolar with 8-Zero Substitution).
Description
Using the code command, you can configure the line code format of the /PRI
interface. Using the undo code command, you can restore the default setting of line
code format of the interface.
The default line code format of /PRI interface is b8zs.
You should keep the peer devices in consistency when setting the line code format of
interfaces.
Example
# Set the line code format of the interface T1 0 to ami.
[3Com-T1-0]code ami

3.3.5 controller t1

Syntax
controller t1 number
View
All views
Parameter
number: Number of the /PRI interface
Description
Using the controller t1 command, you can enter the view of /PRI interface.
Example
# Display how to enter the view of interface T1 2.
44