Display Fr Map-Info; Display Fr Pvc-Info - 3Com 3C13618 Command Reference Manual

The information displayed above indicates that the Frame Relay interface is DTE, 100
"status enquiry" packets have been sent, 100 "status" packets have been received, no
"status" packets are discarded, and no "status" packet timeout occurs.

6.1.13 display fr map-info

Syntax
display fr map-info
View
All views
Parameter
None
Description
Using the display fr map-info command, you can view the Frame Relay address
mapping table.
The information displayed by this command is used to view whether the static address
mapping is correctly configured, and whether the dynamic address mapping works
normally.
For related commands, see fr map, fr inarp.
Example
# Display the Frame Relay address mapping table.
[3Com]display fr map-info
Interface:Serial0:0(protocol status is up):
ip address:66.66.1.2, dlci:16(0x10), map-type:static
broadcast:no, framerelay type:IETF, link status:active

6.1.14 display fr pvc-info

Syntax
display fr pvc-info [ serial interface-number ] [ dlci dlci-number ]
View
All views
Parameter
interface-number: Serial interface number.
dlci-number: DLCI number
Link Layer Protocol
101