Pvc-Pq; Reserved-Bandwidth - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00

6.1.57 pvc-pq

Syntax
pvc-pq { top | middle | normal | bottom }
undo pvc-pq
View
Frame Relay class view
Parameter
top: Set the PIPQ type on a PVC to top.
middle: Set the PIPQ type on a PVC to middle.
normal: Set the PIPQ type on a PVC to normal.
bottom: Set the PIPQ type on a PVC to bottom.
Description
Using the pvc-pq command, you can configure the PIPQ type of a Frame Relay PVC.
Using the undo pvc-pq command, you can restore the default PIPQ type of the Frame
Relay PVC.
By default, the PIPQ type on a PVC is normal.
PIPQ type can be top, middle, normal or bottom. After the queue type on an interface is
set to PIPQ, the packets on each PVC can enter only one type of PIPQ.
This command can take effect only after PIPQ is enabled by the fr pvc-pq command in
interface view.
For related commands, see fr pvc-pq.
Example
# Set the PIPQ type on the PVC to top.
[3Com-fr-class-one]pvc-pq top

6.1.58 reserved-bandwidth

Syntax
reserved-bandwidth bandwidth-percentage
undo reserved-bandwidth
View
Frame Relay class view
136