Rip Metricin; Rip Metricout - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
Example
# Set the interface Serial0 not to accept RIP packet.
[3Com-Serial0] undo rip input

2.1.18 rip metricin

Syntax
rip metricin metric
undo rip metricin
View
Interface view
Parameter
metric: Metric added when a packet is received, ranging from 0 to 16. By default, it is
0.
Description
Using the rip metricin command, you can configure the metric added to the route
when RIP packet is received at the interface. Using the undo rip metricin command,
you can restore the default value.
For related commands, see rip metricout.
Example
# Set the metric value added to 2 when a RIP packet is received at Serial0.
[3Com-Serial0] rip metricin 2

2.1.19 rip metricout

Syntax
rip metricout metric
undo rip metricout
View
Interface view
28