Modem Auto-Answer - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
Parameter
in: Permits only incoming Modem calls. If neither of the two parameters is input, it
indicates that both incoming and outgoing Modem calls are permitted.
out: Permits only outgoing Modem calls. If neither of the two parameters is input, it
indicates that both incoming and outgoing Modem calls are permitted.
Description
Using the modem command, you can enable receiving incoming calls or sending
outgoing calls on interfaces. Using the undo modem command, you can disable
receiving incoming calls or sending outgoing calls on interfaces.
By default, both incoming and outgoing Modem calls are permitted on the interfaces.
This command can be used to set the authority of Modem dial-in and dial-out on an
interface.
Example
# Enable receiving incoming Modem calls on Serial2 interface.
[3Com-Serial2]modem in

2.1.3 modem auto-answer

Syntax
modem auto-answer
undo modem auto-answer
View
Interface (asynchronous serial interface, AUX or AM port) view
Parameter
None
Description
Using the modem auto-answer command, you can configure the external Modem
connected to the asynchronous interface to operate in auto-answer mode. Using the
undo modem auto-answer command, you can restore the external Modem
connected to the asynchronous interface to operate in non-auto answer mode.
By default, the system sets an external Modem to non-auto answer mode.
28