3Com Router Command Reference Guide — V1.00
This command can only be applied to a physical interface, which can be assigned to
multiple dialer bundles.
Note:
To enable the B channel of ISDN interface (BRI or PRI) to config its link layer protocol dynamically in
terms of the Dialer interface it belongs to, link layer protocol that the interface uses should be specified
as PPP.
For related commands, see dialer bundle.
Example
# Make Bri1 a member of dialer bundle1 and dialer bundle2, and assigns it a priority
of 50.
[3Com] interface bri 1
[3Com-Bri1] dialer bundle-member 1 priority 50
[3Com-Bri1] dialer bundle-member 2 priority 50
1.1.5 dialer callback-center
Syntax
dialer callback-center [ user ] [ dial-number ]
undo dialer callback-center
View
Physical or dialer interface view
Parameter
user: Call back according to the parameter user hostname configured in the dialer
route command.
dial-number: Call back according to the parameter telephone-number configured in
the local-user callback-number command.
6