Description
Using the dlsw bridge-set (system view) command, you can link DLSw to the
bridge set of the Ethernet LANs. Using the undo dlsw bridge-set (system view)
command, you can disable the link
To forward the messages of the specified bridge set to the remote end over TCP
connection, you need to use this command to connect a local bridge set to DLSw. In
other words, the messages of the local bridge set can be forwarded to the remote
end through the TCP channel. You can use the command several times to connect
several bridge set to DLSw, so that all of them can be forwarded through the TCP
channel.
Example
None
6.1.10 dlsw enable
Syntax
dlsw enable
undo dlsw enable
View
System view
Parameter
None
Description
Using the dlsw enable command you can enable DLSw., Using the undo dlsw
enable command, you can disable DLSw.
By default, DLSw is disabled.
Example
None
Network Protocol
103