Firewall Configuration Commands; Acl - 3Com 3C13618 Command Reference Manual

Chapter 3 Firewall Configuration Commands

3.1 Firewall Configuration Commands

3.1.1 acl

Syntax
acl acl-number [ match-order config | auto ]
undo acl {acl-number| all }
View
System view
Parameter
acl: The group of rules which used to enter an ACL.
acl-number: The number of ACL, 1-99 stand for the basic IP ACL, 100-199 stand for
extended ACL, 200-299 stands for the ACL based on Ethernet protocol, 700-799
stand for the ACL related to MAC address.
match-order: Specifies the configuration order of ACL.
config: Means the ACL adopts configuration sequence to match. By default, ACL
adopts config sequence.
auto: Means the ACL adopts automatic sequence match according to "depth first".
Description
Using the acl command, you can add an ACL policy group and enter an ACL view. If
an ACL exists, you can directly enter into the ACL policy group. Using the undo acl
command, you can cancel a specified ACL policy group.
By default, no ACL policy group is configured.
For related commands, see display acl.
Example
# Configure a simple digital ACL based on IP and use automatic sequence to match.
Security
29