3Com 3C13618 Command Reference Manual page 741

View
All views
Parameter
all: Enabling all the IKE debugging.
crypto: Enabling information debugging related to encryption.
error: Enabling error information debugging.
message: Enabling information debugging related to message.
misc: Enabling other information debugging.
sysdep: Enabling information debugging related to system.
timer: Enabling information debugging related to timer.
transport: Enabling information debugging related to transport.
Description
Using the debugging ike command, you can enable the IKE information debugging.
Example
None
5.1.4 dh
Syntax
dh { group1 | group2 }
undo dh
View
IKE proposal view
Parameter
group1: Specifying the 768-bit Diffie-Hellman group.
group2: Specifying the 1024-bit Diffie-Hellman group.
Security
91