1.1.25 ppp callback
Syntax
ppp callback { client | server }
undo ppp callback { client | server }
View
Physical or dialer interface view
Parameter
client: As the client end, sends callback requests.
server: As the server end, accepts callback requests.
Description
Using the ppp callback command, you can enable an interface to send or accept
PPP callback requests. Using the undo ppp callback command, you can disable the
interface to send or accept PPP callback requests.
By default, sending or receiving callback request is disabled.
The callback function can be used to save the communication cost for the calling
party in the case that the calling party pays the charge for calls.
For related commands, see ppp callback ntstring.
Example
# Enable accepting callback request on Serial0 interface.
[3Com-Serial0] ppp callback client
1.1.26 ppp callback ntstring
Syntax
ppp callback ntstring dial-number
undo ppp callback ntstring
View
Physical or dialer interface view
Dial-Up
25