3Com 3C13618 Command Reference Manual page 858

3Com Router Command Reference Guide — V1.00
will automatically convert to the uppercase characters). If enabling Modem AT
debugging on the interface, the user can view the code returned by the Modem. If the
command echo is set on the Modem, the user can see the echo AT command.
Note:
A Modem can accept the AT commands only when it is in AT command mode. If it is in data
transmission state, the AT command sent through the sendat command will be invalid.
For related commands, see script-string.
Example
# Send the audio dialing command, and the dialing number is 169.
[3Com-Async1] sendat ATDT169
2.1.13 start-chat
Syntax
start-chat script-name
View
Interface (asynchronous serial interface, AUX or AM port) view
Parameter
script-name: The name of Modem script.
Description
Using the start-chat command, you can configure executing the specified Modem
script on an interface.
This command provides the user with a means of instantly executing the Modem
script. If a script is being executed on the corresponding interface, this command will
not be executed and an error will be reported.
For related commands, see script-string.
Example
# Execute the specified Modem script "example" on the interface.
38