Pos-Server App Flow - 3Com 3C13618 Command Reference Manual

3com 3c13618: reference guide
Table of Contents

Advertisement

3Com Router Command Reference Guide — V1.00
should have been sent to the POS access port by the application but are discarded
because the link has failed, or the buffer is full or the port has not been set. The
packets in the buffer are the packets in the distribution buffer and will be distributed to
the POS access port.
Example
# Display the brief information of the POS interface.
[3Com] display pos-interface
ID Interface State
0
serial0
1
serial1

5.1.8 pos-server app flow

Syntax
pos-server app flow app-number interface-type interface-number
undo pos-server app flow app-number
View
System view.
Parameter
app-number: Number of POS application, ranging from 0 to 31. A router can be
configured with up to 32 POS applications.
interface-type: Interface type.
interface-number: Interface number.
Description
Using the pos-server app flow command, you can configure the POS application in
the asynchronous connection. Using the undo pos-server app flow command, you
can cancel a POS application.
By default, no POS application is configured.
The POS access router is connected to a UNIX front-end processor in the following
two ways: asynchronous connection and TCP/IP connection. The commands used in
these two ways are different.
88
Recv
PacErr MapErr Discarded Buffed
up
100
2
down
0
0
1
3
2
0
0
0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3c136123c136133c13616

Table of Contents