Sample Output Display As Quick Setup Executes - 3Com OfficeConnect Remote 812 Cli User's Manual

Sample Output Display as Quick Setup Executes

OCR-DSL> set system name "name"
OCR-DSL>set system location "vienna"
OCR-DSL>set system contact "jc"
OCR-DSL>enable command password "password"
OCR-DSL>add snmp community public address 0.0.0.0 access RW
OCR-DSL>enable security_option remote_user administration
OCR-DSL>add user "root" password "!root"
OCR-DSL>add ip network "test" interface eth:1 address 192.168.200.254/C
frame ethernet_ii enable no
OCR-DSL>set dhcp mode server
OCR-DSL>set dhcp server start 192.168.200.1 end 192.168.200.40 router
192.168.200.254 dnsl 192.168.200.254 dns2 0.0.0.0 wins1 0.0.0. wins2 0.0.0.0
mask 255.255.255.0
OCR-DSL>add dns host ocrdsl-3com.com addr 192.168.200.254
OCR-DSL>enable dns
OCR-DSL>add tftp client 0.0.0.0
OCR-DSL>set ip network "test" routing ripv2
OCR-DSL>enable ip network "test"
OCR-DSL>enable ip forwarding
OCR-DSL>add ipx network "ipx" address 12345661 interface eth:1 frame
"ethernet_ii"
OCR-DSL>disable bridge spanning_tree
OCR-DSL>add bridge network "bridge"
OCR-DSL>save all
Saving..... SAVE ALL
SAVE ALL Complete
OCR-DSL>Spawned Process CFP 282002 /./QuickSetup.commands Completed
Successfully
Quick Setup (CLI) is designed only for initial set up of the OCR 812. When setup is
complete, this one-time program will alter your configuration files (which the
program cannot edit). If you make an error and need to restart, use the delete
configuration command to reboot and return to factory default settings.
CLI Quick Setup Script 4-7