Chapter 2 Terminal Service Configuration Commands; Terminal Service Attribute Configuration Commands; Idle-Timeout - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
Chapter 2 Terminal Service Configuration

2.1 Terminal Service Attribute Configuration Commands

2.1.1 idle-timeout

Syntax
idle-timeout
undo idle-timeout
View
System view
Parameter
None
Description
Using the idle-timeout command, you can enable the function of the timed
disconnection. Using the undo idle-timeout command, you can disable the function.
By default, timed disconnection is enabled.
For a client at a terminal with console port, the disconnection timeout is 3 minutes.
For a dummy client, the disconnection timeout is 10 minutes. For the user who uses
the dummy terminal in the dial-up mode, the disconnection timeout is 6 minutes. You
can turn off this function by using the undo idle-timeout command so that the client
at the terminal will never be disconnected.
Example
# Turn off the function of timed disconnection.
[3Com] undo idle-timeout
22
Commands