3Com Router Command Reference Guide — V1.00
Example
# Set the dialer number for dialer1 calling the remote end to "11111".
[3Com] interface dialer 1
[3Com-Dialer1] dialer number 11111
1.1.11 dialer priority
Syntax
dialer priority priority
undo dialer priority
View
Physical interface view
Parameter
priority: The priority of a physical interface in a dialer circular group, ranges from 1 to
127. By default, the priority is 1.
Description
Using the dialer priority command, you can configure a priority for a physical
interface in a dialer circular group in the Circular DCC configuration. Using the undo
dialer priority command, you can restore the default priority.
This command sets the order in which the available physical interfaces in a dialer
circular group are used. The physical interfaces with higher priority will be used first.
For related commands, see dialer circular-group.
Example
# Set the priority of Serial 3 in dialer circular group0 to 5.
[3Com-Serial3] dialer circular-group 0
[3Com-Serial3] dialer priority 5
1.1.12 dialer queue-length
Syntax
dialer queue-length packets
undo dialer queue-length
12