Snmp-Agent Sys-Info Location - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
View
System view
Parameter
string: Describe system maintenance contact information, which comprises printable
characters of 1 to 50 bytes (ASCII code is 32 to 127 in length). The default for string is
"3Com Corporation, Marlborough, MA".
Description
Using the snmp-agent sys-info contact command, you can configure system
maintenance administrators' contact information for network administrators' inquiry.
Using the undo snmp-agent sys-info contact command, you can restore system
maintenance administrators' contact information. The system defaults to 3Com's
information.
You must correctly configure system maintenance contact information, so that the
network administrators can be in contact with the equipment administrator.
One or multiple spaces are allowed in the system maintenance contact string. If
multiple, continuous spaces are input, the system will regard them as one space.
The character "?" is not allowed to appear in the system maintenance contact string.
For related commands, see snmp-agent, snmp-agent sys-info location, display
snmp-agent sys-info contact.
Example
# Set the system contact information to "Dial System Operator at beeper # 27345".
[3Com] snmp-agent sys-info contact Dial System Operator at beeper # 27345
# Restore the default system contact information.
[3Com] undo snmp-agent sys-info contact

3.1.17 snmp-agent sys-info location

Syntax
snmp-agent sys-info location string
undo snmp-agent sys-info location
View
System view
54