Reset Dhcp Server Ip-In-Use - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
Parameter
all: All ip-addresses.
ip-address: Represents the specified IP address.
Description
Using the reset dhcp server conflict command, you can reset the statistics of
DHCP address conflicts.
If an IP address is specified in the parameter, clear the statistics of conflicts of this IP
address. If the parameter all is used, reset all the DHCP server address conflicts.
For related commands, see display dhcp server conflict.
Example
# Clear all the statistics of conflicts of all the IP addresses.
[Quidway] reset dhcp server conflict all

2.4.20 reset dhcp server ip-in-use

Syntax
reset dhcp server ip-in-use { all | ip-address }
View
All views
Parameter
all: All ip-addresses.
ip-address: Clear the binding information of a specified IP address.
Description
Using the reset dhcp server ip-in-use command, you can reset the DHCP dynamic
address binding information.
If an IP address is specified in the parameter, clear the binding information of this IP
address. That is, this address can be allocated again. If the parameter all is used,
reset all the DHCP server address in-use.
For related commands, see display dhcp server ip-in-use.
34