Display Ospf Lsa - 3Com 3C13618 Command Reference Manual

Parameter
interface-type: Interface type.
interface-number: Interface number.
Description
Using the display ospf interface command, you can view the interface information
related to the OSPF.
Information output via this command shows the configuration and running of OSPF at
the interface and can help the user in confirming if the configuration is correct or
performing OSPF fault diagnosis.
Example
# Display the database information about OSPF state.
[3Com]display ospf interface
Area: 0.0.0.0
IP Address
192.1.1.1
Area: 0.0.0.1
IP Address
16.1.1.2
[3Com] display ospf interface serial 1
Interface: 202.38.160.1 (Ethernet0)
Overhead: 1 Status: DR
Priority: 1
DR: 202.38.160.1
Permitting DoNotAge lsa
Authentication word: none
Timer interval: Hello: 10 Poll: 0 Dead: 40 Retrans: 5

3.1.14 display ospf lsa

Syntax
display ospf lsa [ router_lsa | net_lsa | sumnet_lsa | asbr_lsa | external_lsa |
nssa_external_lsa | adv_rtr | self_originate | ls_id ] [ area area-id ]
View
All views
Type State Cost Pri DR
PtoP P To P 1562 1
Type State Cost Pri DR
Bcast BackupDR 10
Type: Broadcast
BDR
None None
BDR
1 16.1.1.1 16.1.1.2
Routing Protocol
45