Ip Pool - 3Com 3C13618 Command Reference Manual

User all record queue full
Malloc memory for user fail
Malloc memory for command record fail : 0
Malloc memory for login record fail
Delete user error
Delete command record execption
Find record index execption
Add command record execption
Delete one login record fail
Add login record execption
Add logout time record execption
Delete login record execption
Find login record index execption

2.1.12 ip pool

Syntax
ip pool pool-number low-ip-address [ high-ip-address ]
undo ip pool pool-number
View
System view
Parameter
pool-number: Number of the IP address pool. Ranging 0 to 99, that is, 100 local IP
address pools can be defined at maximum, and there are 2048 addresses in one
pool at most.
low-ip-address and high-ip-address: Starting and ending IP address respectively in
the IP address pool.
Description
Using the ip pool command, you can configure the local IP pool for allocating IP
addresses for PPP users. Using the undo ip pool command, you can cancel the
local IP pool.
By default, local IP address pool is not configured.
The IP address pool is basically configured to allocate IP addresses for PPP users. If
not specifying the end IP address when an IP pool is defined, then this pool has only
an IP address, that is, the start IP address.
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
Security
17