3Com 3C13618 Command Reference Manual page 842

3Com Router Command Reference Guide — V1.00
View
All views
Parameter
interface-type: Interface type.
interface-number: Interface number.
Description
Using the display dialer interface command, you can view the information of DCC
interface.
By default, the information of all the DCC interfaces is displayed.
For related commands, see dialer timer idle, dialer timer compete, dialer timer
wait-for-carrier, dialer timer enable.
Example
# Display the information on the DCC interface Dialer 1.
[3Com]display dialer interface dialer1
Dialer1 - dialer type = Dialer
NextHop_address Dialer_Numbers
123.1.3.1
123.1.3.1
123.1.3.1
123.1.3.1
Idle timer (120 secs),
Wait for carrier timer (60 secs),
Autodial interval (300 secs)
The meanings of the above displayed information are shown in the following table.
Table 1-1 Information displayed by executing the display dialer interface command
NextHop_address
Dialer_Numbers
Idle timer
Compete timer
Wait for carrier timer
Enable timer
Autodial interval
22
6688013
6688001
6688025
6688080
Compete timer (20 secs)
Field
Remote address to which a dialer route on the interface corresponds
The dialer number for the dialer route
Time set by the dialer timer idle command
Time set by the dialer timer compete command
Time set by the dialer timer wait-for-carrier command
Time set by the dialer timer enable command
Time set by the dialer autodial-interval command
Enable timer (5 secs)
Description