X25 Switch Svc Interface - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
Table 5-9 Inputting rule of the pattern matching character string of X.121 address
Character
*
+
\
^
For related commands, see display x25 switch-vc-table svc.
Example
# Add an X.25 switching route with the destination address 8888 and forwarding
address hg1. Substitute 9999 for the destination address at the same time.
[3Com]x25 switch svc 8888 sub-dest 9999 hunt-group hg1

5.1.39 x25 switch svc interface

Syntax
x25 switch svc x.121-address [ sub-dest destination-address ] [ sub-source
source-address ] interface serial interface-number [ dlci dlci-number ]
undo x25 switch svc x.121-address [ sub-dest destination-address ] [ sub-source
source-address ] [ interface serial interface-number ] [ dlci dlci-number ]
View
System view
Parameter
x.121-address: the destination X.121 address. This parameter is a pattern matching
character string, with the length ranging from 1 to 30 characters. For detailed
description of pattern matching, see Table 4-5 and Table 4-6.
number: Output interface number. If an Annex G DLCI is used for output, the interface
must be a Frame Relay interface, and the subsequent argument should specify an
Annex G DLCI for X.25 switching.
dlci dlci-number: Number of the outgoing Annex G DLCI on an output interface. If this
argument is not defined, it means that the interface defined by the precedent argument
is an X.25 interface.
sub-dest destination-address: substitute destination address.
76
Cannot be put in the front of the character string
Cannot be put behind ^
Cannot be put before or behind the characters "+" and "*"
Cannot be put in the front of the character string
Cannot be put behind ^
Cannot be put before or behind the characters "+" and "*"
Cannot be put at the end of the character string
Cannot be put next to + and *
Inputting rule