Ppp Pap Local-User - 3Com 3C13618 Command Reference Manual

Example
# Specify the corresponding virtual interface template 1 for the username 3Com, and
configures the IP address of the virtual interface template as 202.38. 60.1.
[3Com]ppp mp user 3Com bind virtual-template 1
[3Com]interface virtual-template 1
[3Com-Virtual-Template1]ip address 202.38.60.1 255.255.255.0

1.1.16 ppp pap local-user

Syntax
ppp pap local-user username password { simple | cipher } password
undo ppp pap local-user
View
Interface view
Parameter
username: username sent.
password: password sent.
simple: password in plain text.
cipher: password in cipher text.
Description
Using the ppp pap local-user command, you can configure the username and
password when the local router is authenticated by the remote router via the PAP. Using
the undo ppp pap local-user command, you can disable the configuration.
By default, both the username and password sent are null.
When the local router is authenticated via the PAP by the remote router, the username
and password sent by the local router must be the same as the user and password of
the remote router.
For related commands, see ppp authentication-mode, local-user.
Example
# Set the username of the local router authenticated by the remote end via the PAP
method as corporate and the password as 3Com.
[3Com-Serial0]ppp pap local-user corporate password simple 3Com
Link Layer Protocol
19