X25 Switch Svc Hunt-Group - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
Parameter
name: ROA name.
id: ROA-specified ID which ranges from 0 through 9999. Multiple IDs can be specified.
Description
Using the x25 roa-list command, you can configure the ROA list. Using the undo x25
roa-list command, you can cancel a ROA list entry.
By default, no ROA is defined.
Multiple ROAs (0 to 20) can be configured, and multiple IDs (1 to 10) can be specified
for each ROA. When an ROA is configured, it can be quoted by name in the x25
call-facility or x25 map command.
For related commands, see x25 call-facility, x25 map.
Example
# Define two ROA lists, and then quote the list on serial interfaces 0 and 1.
[3Com]x25 roa-list list1 11 23 45
[3Com]x25 roa-list list2 345
[3Com]interface serial 0
[3Com-Serial0]x25 call-facility roa-name list1
[3Com]channel interface serial 1
[3Com-Serial1]x25 call-facility roa-name list2

5.1.38 x25 switch svc hunt-group

Syntax
x25 switch svc x.121-address [ sub-dest destination-address ] [ sub-source
source-address ] hunt-group hunt-group-name
undo x25 switch svc x.121-address [ sub-dest destination-address ] [ sub-source
source-address ] [ hunt-group hunt-group-name ]
View
System view
Parameter
x.121-address: the destination X.121 address. This parameter is the pattern matching
character string with the length ranging 1 to 30 characters. For more details about
pattern matching, see Table 4-5 and Table 4-6.
sub-dest destination-address: the substitute destination address.
sub-source source-address: the substitute source address.
hunt-group-name: the name of the hunt group.
74