Save - 3Com 3C13618 Command Reference Manual

Use this command cautiously, preferably under the guidance of technical support
personnel. Do not use this command before save command, which also cancels the
setting of the flag bit.
For related commands, see delete, save, display current-configuration, display
saved-configuration.
Example
# Set the flag bit to enter setup.
[3Com] first-config set

1.1.8 save

Syntax
save
View
All views
Parameter
None
Description
Using the save command, you can save the current configuration file to Flash
memory or NVRAM.
When a set of configurations has been completed and have implemented the
intended functions, the current configuration files should be saved to Flash memory or
NVRAM (in the 3Com series of routers, they will be saved to the storage media
specified by the configfile command).
For related
current-configuration, display saved-configuration.
Example
# Save the system current configuration to the configuration file in Flash memory or
NVRAM.
[3Com] save
Now writing the running config to flash memory.
Please wait for a while......
commands, see delete, download
System Management
config, display
11