3Com Router Command Reference Guide — V1.00
Upstream interface: Ethernet2, RPF neighbor: NULL
Downstream interface list:
Ethernet3, Protocol 0x100: RPT, timeout in 185 sec
Total 2 entries listed
2.1.14 display pim rp-info
Syntax
display pim rp-info [ group-address ]
View
All views
Parameter
group-address: Multicast group address to be viewed.
Description
Using the display pim rp-info command, you can view information of RP
configured.
This command will display information of all RP configures. If parameters are
specified, only RP information in the specified multicast group will be displayed.
Example
[3Com] display pim rp-info
PIM-SM RP-CONFIGURE information:
BSR is: 3.3.3.3
Group/MaskLen: 224.0.0.0/4
RP 3.3.3.3, Version 2
priority: 0
uptime(from last update): 21:56, to expire in: 1:34
2.1.15 pim
Syntax
pim
View
System view
Parameter
None
Description
Using the pim command, you can enter the PIM view from the system view.
20