Debugging Pim Sm - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
View
All views
Parameter
all: Enable all debug switches.
alert: Enable alert debug switch.
mrt: Enable debug switches related to multicast route table .
recv all: Enable debug switches for receiving all types of protocol packets.
recv assert: Enable debug switch for receiving assert packet.
recv graft: Enable debug switch of receiving graft packet.
recv graft-ack: Enable debug switch for receiving graft acknowledgement
packet.
recv join: Enable debug switch for receiving join coverage packet.
recv prune: Enable debug switch for receiving prune packet.
send all: Enable debug switch for sending all types of protocol packets.
send assert: Enable debug switch for sending assert packet.
send graft: Enable debug switch for sending graft packet
send graft-ack: Enable debug switch for sending graft acknowledgement packet
send join: Enable debug switch for sending join coverage packet.
send prune: Enable debug switch for sending prune packet.
timer: Enable the debug packet switch of the timer
warning: Enable debug switch for general warning packet
Description
Using the debugging pim dm command, you can enable PIM-DM debug packet
switch. Using the undo debugging pim dm command, you can disable PIM-DM
debug packet switch.
By default, the system turns off PIM-DM debug packet switch
Example
None

2.1.7 debugging pim sm

Syntax
debugging pim sm { all | mbr | mrt | timer | warning | { recv | send } { assert |
bootstarp | crpadv | jp | reg | regstop } }
14