Get - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
0x19
0x1a
0x1b

1.3.2 get

Syntax
get ip-addr file-name { system | config }
View
System view
Parameter
ip-addr: IP address of TFTP server, which is in the dotted decimal format X.X.X.X.
file-name: File name of no more than 47 characters .
system: File type, indicating that the uploaded file is a system file.
config: File type, indicating that the uploaded file is a configuration file.
Description
Using the get command, you can download the configuration file or system file named
file-name from a TFTP server into Flash memory or NVRAM of the local router.
The system file is saved in the Flash memory of the router. And the configuration file
is saved either in the Flash memory or NVRAM memory of the router, depending on
the router hardware and the configuration. If the router has a NVRAM, you can use
the configfile nvram command to save the configuration file in the NVRAM memory.
For related commands, see copy.
Example
# Download the configuration file from the TFTP server with the IP address 10.110.1.1
into Flash memory or NVRAM of the local router.
[3Com]get 10.110.1.1 sys.cfg config
start downloading config file...
errno=0x0
end downloading.
20
Operation
Error occurred when writing the system file.
Error occurred when reading the system file.
Succeeded to read the system file but selected not to write the file.
Description